To ensure the normal use of the capsule equipment machine, daily maintenance work is essential. The following editor from hgcaps Custom Capsule Manufacturers will teach you the correct maintenance method.
The vacuum separator of the capsule equipment machine vacuum system mainly plays the role of sucking the capsule into the upper and lower modules and separating the cap and the body in the filling of the hard capsule. If the capsule cannot be separated from the cap and the body, the subsequent filling will not be carried out. Each time the turntable of the capsule equipment machine runs one station, the main shaft of the machine rotates once, and the vacuum separator of the capsule equipment machine moves up and down once under the action of the cam.
If the capsule cap and body are not separated smoothly, check the gap between the upper plane of the vacuum separator and the lower plane of the lower module. If the gap is too large, the vacuum degree of the vacuum system will not reach the vacuum degree required for the separation of the cap and the body. If the gap is too small, it is easy to cause a collision and deform the lower module. When the position of the vacuum separator needs to be adjusted, turn the main motor shaft of the capsule equipment machine with the handle to make the vacuum separator rise to the highest position, loosen the locking nuts at both ends of the adjusting rod under the machine table, and then rotate the adjusting rod to adjust the vacuum separation Adjust the height of the device, then lock the nut, and use the handle to turn the main motor shaft to test until it is suitable. The vacuum degree is read out on the vacuum gauge on the machine operation panel. When the vacuum is too high, the vacuum degree regulating valve can be properly opened, and when the vacuum is too low, the vacuum degree regulating valve can be turned off or closed. The filter of the capsule equipment machine vacuum system should be opened regularly to remove the clogged dirt to ensure that the vacuum system has enough vacuum.
HGCAPS is a professional Empty Capsules Manufacturers. We offers a vertically integrated supply chain model to ensure reliable long-term supply, complete traceability and superior quality of raw materials.
Add:HuaGuang 1 road #2 Xinchang Gaoxin Jishu yuanqu , Zhejiang Province. China Zip-code #312500